![]() Disconnect controller from USB and power.Ģ. Now you can upgrade firmware through menu options as described at begginning.ġ. If LED is not blinking very quickly controller is not in bootloader mode and you need to start again.ĥ. If everything is OK then LED will start blinking very quickly. Release "reset" button (or connect power), wait a moment and the remove "Jog8" jumper shortcut. If you have jogging keys connected to controller you can press and hold "Jog8" button.ģ. This it second pin from right - see image. Press and hold "reset" button (or disconnect power) and place jumper or create shortcut on "Jog8" pin (this is between RB4 and VCC)). Connect controller to computer with USB cable.Ĭontroller has blinking LED which indicates that controller is working properly.Ģ. If you have older version of firmware or if you constantly get "Firmware update FAILED" or "Not in firmware mode" message then you must put controller into firmware bootloader mode manualy:ġ. You can check your software and firmware version with menu option "Help/About". If there is something wrong and you receive "Firmware update FAILED" message just repeat procedure. Select menu option "Machine/Firmware/Update" How to update CNC USB Controller firmwareįirmware can be easily updated through menu options.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |